Installation - LG WD14070D6 Service Manual

4. INSTALLATION

INSTALLATION
The appliance should be installed as follows.
1
Check the conditions of installation area.
1. Check level ground.
horizontal
On raised foundations or upper level homes, the
It may be necessary to move
reinforced to properly support the operation of the unit.
2. Check for humidity or any foreign objects under the feet.
Clean the floor, there should be no foreign objects under the feet.
If the unit has foreign objects underneath the feet, this will prevent the unit from being leveled properly
and will cause
Remove any foreign
See below for examples of foreign objects.
Purchased
stopper
2 Open the box and check appliance condition.
Washer
Base Packing
the machine
vibrations and slipping.
objects, if any from underneath the machine and level unit properly.
Carpet
Spanner
vibrations can be caused by the type of flooring.
to a different area in the home or have the floor
Paper
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and
drain hose.
4. Remove the inlet hose from the drum.
Keep the spanner provided for future use.
8
Laminated
paper