Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
• Always keep this device dry. Do not immerse in water.
• For your safety, do not attempt to open the unit or the battery compartment. Attempting to open the battery compartment violates
your warranty.
• The Wireless TV Speaker uses a lithium-ion battery. Please dispose of this unit in accordance with local recycling laws.
• Do not unplug by pulling on the cord. To unplug, grasp the plug itself and not the cord.
• Unplug this unit when it is not in use and before cleaning.
• Do not operate this device with a damaged cord or plug. If the cord or plug appear frayed or damaged, contact Sharper Image
Customer Service immediately.
• This device is intended for home and personal use only.
TROUBLE SHOOTING
PROBLEM
No sound is coming from the
Wireless TV Speaker.
The Wireless TV Speaker works
when I watch cable TV, but it
does not work when I watch
Netflix (or other streaming
service).
When I reduce the volume on the
television, the volume decreases
on the Wireless TV Speaker. How
can I make them independent
of each other?
SOLUTION
• Check all connections to ensure that all cords are firmly connected at the back of the Transmitter Base and TV.
• Confirm that the receiver is no more than 100 feet away from the Transmitter Base.
• Try re-pairing the Speaker with the Transmitter Base.
• Battery has run out of power. Recharge battery for approximately 3 hours.
• Volume knob is set too low. Increase the volume on the Speaker.
• Check your TV sound settings. Use your TV remote to access the TV Menu. Increase the sound output level
using your TV remote. Consult your TV owner's manual for details.
• Newer TVs have the option to set digital audio output to either "Dolby" or "PCM." If your TV is set to Dolby, try
switching it to PCM. Consult your TV owner's manual for details.
• Check if your Wireless TV Speaker is connected to the cable box. If it is, try connecting it directly to the TV.
• Check if your Wireless TV Speaker is connected to the TV. If it is, try connecting it directly to the cable box.
• Turn off the internal speakers of your television. To do this, use your TV remote to access your television sound
settings. (Consult your TV owner's manual for details.) When the speakers on your television are turned off, you
should still be able to hear sound on your Wireless TV Speaker.
- 9 -
Advertisement
Table of Contents
