Advertisement
HEC AUX IN - DSP PRO
HELIX EXTENSION CARD
Signal routing of the HEC module
As soon as the HEC module is installed, it is automatically detected
by the device and the Status LED on the HEC module will light up
green. Now you can allocate the HEC module to the desired outputs
in the "AUX Routing" matrix.
Several new features are visible in the DSP PC-Tool after installing
a HEC module.
The optical SPDIF output of the HEC AUX IN module
The installation of the HEC module adds as well an additional digital
optical SPDIF output to your device. This output allows to transmit
any unprocessed input or processed output signals to other devices.
A new matrix "Optical Output Routing" appears in the "Input and Out-
put Configuration" page in which you can make your desired settings.
The digital output delivers an uncoded stereo PCM signal with 96 kHz
/ 24 Bit.
Hünegräben 26 · D-57392 Schmallenberg · Tel.: +49 2972 97880 · E-mail: helix@audiotec-fischer.com
Warranty disclaimer
The limited warranty comply with legal regulations. Failures or
damages caused by overload or improp er use are not covered
by the warranty. Please return the defective product only with a
valid
proof
of
purchase
scription.
Technical
specifications
Errors are reserved!
For
damages
on
the
by
hand ling
errors
of
sume
liability.
These
devices
in vehicles within the European Community (EC).
and
a
detailed
malfunction
are
subject
to
vehicle
and
the
device,
the
module,
we
can't
are
certified
for
de-
change!
caused
as-
the
use
Advertisement
