Dvd-Rw Drive - Fujitsu BS2000 SE Series Operating Manual

2.2.5 DVD-RW drive

The DVD-RW drive enables you to read digital data which is stored on a data CD or data DVD (CD-R or DVD-R for
example).
You can also store digital data on a writeable CD or DVD.
This drive is used for:
X2000: providing an update (administrator or Customer Support)
BS2000: installing a BS2000 emergency system (administrator or Customer Support)
BS2000: updating BS2000 via EMFILE (administrator)
BS2000: data transfer between BS2000 systems via EMFILE (customer/administrator)
BS2000: creating a BS2000 EMFILE on CD/DVD directly from the BS2000 system (customer/administrator)
Figure 6: DVD-RW drive: front view
No. Meaning
1 Drive tray: contains the CD/DVD
2 Drive indicator:
flashes quickly when a CD/DVD is inserted
goes out when the drive is ready for reading
lights up when the DVD drive is accessed
3 Eject button:
To open the tray press the button briefly (for less than 1 second)
4 Opening for manually removing the CD/DVD (Customer Support)
i
After the CD/DVD has been inserted, the medium/drive must still be assigned for BS2000 operation by
using BS2000 commands (
Administration" manual [ ].
The device must be detached in BS2000 to permit it to be used in X2000 or for installation of the
BS2000 emergency system.
When the drive indicator has gone out, the CD/DVD can then be ejected using
device is still attached in the BS2000 system) or by briefly pressing the eject button.
or
/ATTACH-DEVICE /CHECK-TAPE
5
) (see the "Operation and
/UNLOAD-TAPE
(if the
16