Download Print this page

Epson WB-L Series Instruction Manual page 2

Advertisement

【How to Use the Wristband】
1. Install an attachment for wristband to the printer.
<CAUTION: For how to install it, see the Attachment for Wristband User's Manual.>
2. Cut the label that xes the end of the rolled wristband to make it available.
Do not use an outer circumference of the roll, for it is wrapped for protection.
<CAUTION: Peeling o the label forcibly may tear o the wristband or cause the printer malfunction by remaining glue on
the printing surface.>
3. Set the wristband to the printer.
<CAUTION: For how to set it, see the User's Manual for the printer.>
4. Print necessary information on the wristband.
<CAUTION: For print setting of the printer, see "Recommended Print
Setting" on the reverse page.>
5. Cut the printed wristband o from the edge by pulling it to both sides.
6. Insert 2 pins on the snap into 2 holes (in one end of the wristband) to the base of
the pins.
7. Wrap the wristband around where you attach it, and whlie leaving proper space
(of about one or two ngers), close and x the snap rmly by inserting the pins
on the snap into the holes.
<CAUTION: Wrapping the wristband too tightly may get the skin sweaty or
cause a skin abnormality. Ensure vantilation while using it.>
8. After closing the snap, check whether the snap is rmly xed by pulling the end
of the wristband.
<CAUTION: If the wristband is not xed, insert each pin on the snap into the
hole in the wristband and x it.>
9. Cut the surplus wristband using scissors or a similar tool.
【Notes After Use】
After using the wristband, cut it o using scissors or a similar tool.
<CAUTION: Be careful not to hurt the skin.>
<CAUTION: Do not open the snap forcibly once you x it. Doing so may injure
your nger or nail.>
【Product Materials】
Product
Wristband
Snap
The wristband and the snap are antibacterial.
Dermatologically tested (by the closed skin patch test).
Material
PET + PE
PE
【Notes on Storage】
Do not store the wristbands in locations subject to direct sunlight
and high humidity.
Store in an individual box in a cool dark place after opening.

Advertisement

loading

This manual is also suitable for:

Wb-m seriesWb-s series