Advertisement
Water Resistance Level IPX4
•
Suitable for indoor and outdoor use in the presence of incidental or light
exposure to splashing water, rain, or snow.
•
It is not recommend to submerge this speaker in water for any amount of
time.
IMPORTANT: To ensure your speaker is prepared for use in a wet environment,
disconnect and remove any power cables, and tightly close the charging port water
cap. If the water cap is not properly closed, water resistance will be compromised
and could result in damage to the speaker or personal injury to the user.
USB
AUX
DC5V
SD
Charging the Battery
To power the unit or charge the internal battery, plug the USB charging cable
into the DC Power Input on the speaker and a powered on computer or USB power
adapter (not included) and standard power outlet. Play time with a fully charged
battery is approximately 2.5 to 3 hours at full volume, or 6 hours with the
volume at 50%.
WARNING: DO NOT CHARGE THE SPEAKER OR A MOBILE
DEVICE WHILE IT IS NEAR WATER OR IF IT MAY GET WET.
ALLOW AMPLE TIME TO DRY AFTER BEING SPLASHED.
Radio Reception
An FM receiver is built into the speaker. Adjust the position of the speaker to
improve FM radio reception.
NOTE: The USB cable (included) doubles as an FM antenna. Insert the cable in the DC In
port for FM reception.
Radio Tuning and Saving Station Presets
to select FM Radio Mode, this will be indicated by a voice
1.
Press
prompt.
2.
Press and hold
to begin to scan and save radio stations automatically.
3.
Press and hold
to cycle through saved radio stations.
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d'assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
FM Radio
Pairing & Playing Audio
When first powered on, the speaker defaults to Bluetooth Mode, indicated by a
voice prompt. All other play modes will change automatically when connected to
the different audio sources.
1.
Power on the speaker by pressing and holding the
powering on, the unit will start in Bluetooth Mode, indicated by a voice
prompt. When pairing, remain within 3 feet of the Bluetooth device.
2.
Using the controls on your Bluetooth device, select ISBW249 in the
Bluetooth Settings to pair. If need be, refer to the user's manual for your
specific device for more information.
3.
When successfully paired, a voice will announce "Bluetooth is connected"
and the LED indicator will turn solid blue. Audio from the connected
Bluetooth device will now be heard through the speaker.
4.
Use the controls on the connected Bluetooth device to select and play
audio. Use the speaker controls or the connected Bluetooth device to play,
pause, and adjust the volume level.
5.
After initial pairing, press and hold
on. " The speaker will power ON and automatically connect to the last
Bluetooth device used. Note: If your device should become unpaired or you
find it is unable to connect, press & hold the
Mode. A voice will announce "Bluetooth is connecting" and you can connect
to the speaker manually.
1.
Load a USB drive or MicroSD Card into the corresponding port. The speaker
will automatically detect the connection and start playing.
• Press
• Press and hold
change the volume level.
Requires a 3.5mm audio cable (not included).
Connect a 3.5mm audio cable to the Aux In on the unit and the
1.
audio output/headphone jack on an audio device. The speaker will
automatically detect the connection.
2.
Use the controls on the connected device to select
and play audio.
Customer Support
Bluetooth Wireless
until the voice prompt says "Power
USB & MicroSD Memory Card
to pause or play media.
to change tracks back or forward. Press to
Aux In
button. When first
button to enter to Pairing
Made
Green
Protect for Today
Sustain for Tomorrow
Advertisement
