Table of Contents
Advertisement
Restraints System Malfunction
Warning Indicator
The restraints system includes
the airbags and seatbelt
buckle pretensioners. If the
light does not illuminate or does not go
out when the ignition is first switched on,
or illuminates whilst the vehicle is being
driven, have the system checked by an
authorised Ford dealer as soon as
possible.
Dynamic Stability Control Indicator
Note: Dynamic Stability Control ( DSC)
is also known as Electronic Stability
Control. (ESC)
Flashes to indicate that the
DSC system is controlling the
spinning of the driven wheel(s),
and/or controlling under/oversteer of the
of the vehicle, and illuminates
continuously if the DSC system has been
deactivated via the DSC switch. If the
DSC symbol stays illuminated whilst
driving with the system switched on, a
system fault is indicated. Have the
system checked by an authorised Ford
dealer as soon as possible.
Dynamic Stability Control Indicator
Off
Illuminates continuously if the
DSC system has been
OFF
deactivated via the DSC
switch.
Seatbelt Warning Light
Reminds occupants to fasten
their seatbelts. There are two
modes for the seatbelt
indicator:
Instrumentation
•
•
Instrument Cluster Warning
Lamps - Right Side
ABS Malfunction Warning
the light does not illuminate when the
ignition is first turned on, does not go out,
or illuminates whilst the vehicle is being
driven, have the system checked by an
authorised Ford dealer as soon as
possible. Your brakes will operate
without the ABS function during this
period, provided the brake system
warning light is not illuminated.
-68-
Warning Mode: The seatbelt
indicator is activated when the
ignition is turned on. If the driver or
passenger seatbelt is unbuckled,
the seatbelt warning light remains
on for eight seconds or until both
seatbelts are buckled.
Beltminder
Mode:
TM
Supplemental feature which
provides additional warnings, if
the driver or passenger seatbelt is
unbuckled, by sounding a chime
and illuminating the seatbelt warning
lamp in the instrument cluster. Refer
to 'Occupant Protection' section of
this manual for further information.
The lamp illuminates briefly
when the engine is started,
signifying a system check. If
Advertisement
Table of Contents
