Features; Freezer Compartment Flap; Accessories; Basic Operation - Siemens GI81N Series User Manual

en Features
switches the warning signal off.
1
/ sets the temperature of the
2
freezer compartment.
Displays the set temperature for the
3
freezer compartment in °C.
switches Super freezing on or
4
off.
switches the appliance on or off.
5

Features

Features
Here you can see an overview of the
Features
features of your appliance and their
use.
The features of your appliance de-
pend on the model.

Freezer compartment flap

Store food that is used frequently or
that only needs to be stored for a
short time on the shelf behind the
freezer-compartment flap.

Accessories

Use original accessories. These have
been made especially for your appli-
ance.
The accessories for your appliance
depend on the model.
Ice pack
Use the ice pack for temporarily
keeping food cool, e.g. in a cool bag.
Tip: If a power failure or malfunction
occurs, the ice pack can be used to
slow down the thawing process for
the stored frozen food.
Ice cube tray
Use the ice cube tray to make ice
cubes.
36
Making ice cubes
Fill the ice cube tray with water up
1.
to ¾ and place in the freezer com-
partment.
If the ice cube tray is stuck to the
freezer compartment, loosen it with
a blunt implement only (e.g. spoon
handle).
To loosen the ice cubes, twist the
2.
ice cube tray slightly or hold it
briefly under flowing water.

Basic operation

Basic operation
You can find out everything you need
Basic operation
to know about operating your appli-
ance here.

Switching on the appliance

Press .
1.
a The appliance begins to cool.
a A warning signal sounds and
lights up because the freezer com-
partment is still too warm.
Switch off the warning signal with
2.
.
goes out as soon as the set
a
temperature has been reached.
"Set the required temperature."
3.
→ Page 37

Operating tips

¡ Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the temperature has
been reached.
¡ The front panels of the housing are
temporarily heated slightly. This
prevents condensation in the area
of the door seal.