Audio Settings - Sony BDP-SX910 Operating Instructions Manual

HDMI/LCD Video Format
Normally select "Auto."
Select "Original Resolution" to output the
resolution recorded on the disc. When the
resolution is lower than the SD resolution,
it is scaled up to the SD resolution.
z
If no picture appears on the connected TV after
setting the resolution, try another resolution
setting.
BD/DVD-ROM 1080/24p Output
Auto:
Outputs 1920 × 1080p/24 Hz video
signals only when connecting a 1080/
24p-compatible TV using the HDMI
OUT jack.
Off:
Normally select this when your TV is
not compatible with 1080/24p video
signals.
b
No picture appears on the LCD screen when 24p
video signals are output from the HDMI OUT
jack.
YCbCr/RGB (HDMI)
Auto:
Automatically detects the connected
TV type, and switches to the matching
color setting.
YCbCr (4:2:2):
signals.
YCbCr (4:4:4):
signals.
RGB:
Outputs RGB video signals.
Pause Mode
Auto:
Normally select this. Dynamic moving
pictures appear without blurring.
Frame:
Displays static pictures at high
resolution.
18
Outputs YCbCr 4:2:2 video
Outputs YCbCr 4:4:4 video

Audio Settings

Audio (HDMI)
Auto:
Normally select this. Outputs audio
signals according to the status of the
connected HDMI device.
PCM:
Outputs PCM signals from the HDMI
OUT jack.
BD Audio MIX Setting
On:
Outputs the audio obtained by mixing
the interactive and secondary audio to
the primary audio.
Off:
Outputs the primary audio only. Select
this to output HD audio signals to an AV
amplifier (receiver).
DTS Neo:6
Cinema: Outputs the simulated multi-
channel sound from 2 channel sources
via the HDMI OUT jack according to
the capability of the connected device
using "DTS Neo:6 Cinema" mode.
Music: Outputs the simulated multi-
channel sound from 2 channel sources
via the HDMI OUT jack according to
the capability of the connected device
using "DTS Neo:6 Music" mode.
Off: Outputs the sound with its original
number of channels via the HDMI
OUT jack.
Audio DRC
Auto:
Performs playback at the dynamic
range specified by the disc (BD-ROM
only). Other discs are played back at the
"On" level.
On:
Performs playback at a standard
compression level.
Off: No compression works. A more
dynamic sound is produced.