Using Your Ss15; Using Without Connecting To A Host Computer; Using When Connected To A Host Computer; Charging - CAMBRIONIX SS15 User Manual

Hide thumbs Also See for SS15:

Table of Contents

5.Using your SS15

When the Hub is switched on and is not connected to a local host computer it is

automatically configured to charge devices using its intelligent charging algorithm. Simply

connect the devices to be charged to any of the available ports (not the Host Port) using

USB - compliant cables.

Once the devices are connected, the algorithm will detect the highest charge rate allowable for

each attached device. Charging at the optimum rate (up to 2.1A) specified by the manufacturer

will commence once profiling is complete. Depending on the state of charge of the device

attached, this may take tens of seconds.

When the Host Port is connected to a local computer, the hub defaults to Sync mode and

charge currents are determined according to USB Implementers Forum (USBIF) Super-Speed

USB3.0 specifications. If the attached device complies with USB-IF Battery Charging

specification BC1.2 and supports Charging Downstream Port (CDP), the hub can provide

high-speed charging at up to 2.1A. If the connected device does not comply with BC1.2,the

charge current will be limited to 500 mA in compliance with USB specifications.

If you wish to transfer data, change applications, restore or update your mobile device, a data

connection to a local host computer is required. The hub works independently to the Operating

System (OS) and data transfer can be performed to all common mobile operating systems, such

as iOS, Android, Chromebook and Microsoft. In order to transfer data, connect the host port to

your local (host) computer using a Type-A to Type-A USB2.0 (or higher) compliant cable. Any

devices connected to the hub will now appear as if they were connected to the host computer's

SS15

Page 8 of 17

Table of Contents