Dsp Usage; Rs-232 Control Port - B&K Reference 21 Owner's Manual

DSP Usage

Allows displaying the current DSP usage in MIPS.
ADVANCED SYSTEM SETUP
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles
4 Control Out
5 Security Options
6 DSP Usage 6 DSP Usage

7 RS-232 Control Port

next item
MENU setup system
From Remote
1 À (PAUSE) or § (STOP)
2 SEL or ENTER
3 À (PAUSE) or § (STOP)
RS-232 Control Port
Configure the advanced computer interface control port on your processor. For further information concerning RS-
232 operation, see BKC-DIP for the computer interface protocol, and the AVR317 and Reference 31 device
specific appendixes.
RS-232 port setup -
ADVANCED SYSTEM SETUP
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles
4 Control Out
5 Security Options
6 DSP Usage
7 RS-232 Control Port 7 RS-232 Control Port
next item
MENU setup system
RS-232 PORT
From Remote
1 À (PAUSE) or § (STOP)
2 SEL or ENTER
3 À (PAUSE) or § (STOP)
4 ¶ •
(REW) or (FF)
SEL select
DSP USAGE
From Front Panel
(UP) or (DOWN)
(ENTER)
(UP) or (DOWN)
SEL select
From Front Panel
(UP) or (DOWN)
(ENTER)
(UP) or (DOWN)
VOLUME KNOB
DSP USAGE
1 Utilized DSP 1 Utilized DSP
Processing Power
Processing Power
XXX MIPS XXX MIPS
MENU advanced setup
XXX MIPS FREE
Action
move to DSP Usage
activate DSP USAGE
display currently used DSP MIPS
RS-232 PORT SETUP
1 Port 1 Port
2 Baud Rate
3 Echo
4 Update
5 Receive ID
6 Transmit ID
next item SEL select
MENU advanced setup
PORT ENABLED
Action
move to RS-232 Control Port
activate RS-232 PORT SETUP
move to Port
select Enabled or Disabled
74
Enable Enable
9600
Enable
Enable
0
0