Azden SGM-1000 Specifications

PROFESSIONAL SHOTGUN MICROPHONES
SGM-1000 Phantom-Powered Shotgun Microphone
SGM-2X — Ideal for full sized cameras
SGM-1X — perfect for mid-sized cameras
SGM-X — designed for today's
Mini DV cameras
SMX-10 – high-performance stereo microphone
Now you can record in stereo directly with Azden's SMX-10. The 160mm (6.3")
long dual uni-directional electret-condensor mic is powered by a single "AAA"
battery (not included), features a built-in cable with a 3.5mm stereo mini plug and
comes with a windscreen and camera shoe-mount.
Use either 12-48V Phantom power or a single internal "AA" battery
• new, high performance mic element • 310mm (12.2") long
• wide frequency response • highly directional pick-up pattern
• high sensitivity and low noise • XLR output • switchable low
frequency filter • foam windscreen • shock-mount holder with
integral shoe-mount
Two microphones in one, the SGM-2X can be configured as either a
400mm (15.75") long shotgun or, by changing to the included short
barrel, a 206mm (8.125") long general purpose omni-directional mic.
Its low-noise, wide frequency response element provides a low
impedance output (XLR) and uses a single "AAA" battery. The mic
comes with a switchable low frequency filer, a shock-mount with
built-in shoe-mount and windscreens for both configurations.
Designed for cameras similar to the XL-2 and PD-170, the SGM-1X
is 298mm (11.75") long and comes with a foam windscreen, shock-
mount with integral shoe-mount, low impedance XLR output and
features a switchable low frequency filter. A single "AAA" battery can
operate the mic for approximately to 1000 hours.
At 216mm (8.5"), the mini SGM-X is a complete shotgun solution for
small, Mini DV cameras. Included is a shoe-mount holder, windscreen,
battery (LR-44) and mini-to-mini jack cable.