Installation Steps; Package Contents; Installation Guide - Axis 247S Installation Manual

AXIS 247S Installation Guide
This installation guide provides instructions for installing the AXIS 247S Video Server on
your network. For all other aspects of using the product, please see the User's Manual,
available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 4.
4. Set an IP address. See page 5.
5. Set the password. See page 8.

Package contents

Item
AXIS 247S Video Server
Terminal connector kit
Mounting kit
CD
Printed Materials
Optional Accessory
Connector Cable
PoE Midspan
Important!
• There are two alternative connections available for power out, video in and audio in, providing
flexible installation. Do not connect more than one video/audio source as the AXIS 247S is a
one-channel video server and can only accommodate one video/audio stream.
• The AXIS 247S can deliver a maximum of 5W (420mA) to a camera (from power out or Mini-
DIN connector) and 50mA from the I/O terminal connector.
AXIS 247S

Installation Guide

Models/variants/notes
4-pin and 2-pin connector blocks for connecting external devices
Metal plate and bracket for wall or cage mounting
AXIS Network Video Product CD, including product documentation, installation
tools and other software
AXIS 247S Installation Guide (this document)
Axis Warranty Document
Cable with 6 pin Mini-DIN connector for audio in, video in and power out
Power over Ethernet midspan (1 port)
Important!
This product must be used in
compliance with local laws
and regulations.
Page 3