Control Button; Product Label - Axis 250S Blade Installation Manual

4 AXIS 250S Blade - Rack Solution Installation Guide
AXIS 250S Blade Video Server
Read the following information to familiarize yourself with the AXIS 250S Blade video
server making particular note of where the connectors and indicators are located:

Control Button

See the AXIS 250S User's Manual for information on the use of the
control button.
Indicators
Power
Green
Amber
Status
Green
Red
Network Amber
Green
Red
None
Connectors
MIC Microphone connector
LINE
Line connector
VIDEO IN
Y/C video input
(S-video)
Video Input (BNC)

Product Label

S/N (serial number) is identical to the unit's MAC/Ethernet address, e.g. 00408C1A2B3C =
00-40-8C-1A-2B-3C. P/N (part number) is the product model number.
Normal operation
Flashing green or unlit for power supply failure
Flashes amber during firmware upgrade
Normal operation
Flashes rapid red for a critical error
Flashes for activity on a 10 Mbit/s network
Flashes for activity on a 100 Mbit/s network
No network connection
No connection
connection is made using an s-video cable
connection is made using an RG59, 75 Ohm coax
video cable; with a recommended maximum
length of 800 feet (250 meters).
Control Button
Top and bottom screws
blade server in the rack
P/N: XXXX-YYY-ZZ
S/N: 00408C1A2B3C
are used to secure the