Assembly - Husky H41CH4HD Use And Care Manual

Assembly

Two people are recommended for assembly.
CAUTION:
1
Attaching the cabinet handle
□
Position the cabinet handle (C) over the holes on the
cabinet (B).
□
Attach with the bolts (CC) and tighten with supplied
hex key (DD).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
NOTE: One handle comes with this cabinet and can be
installed on either the left or right side. If a second
handle is desired, please call 1-888-HD-HUSKY to order.
3
Attaching the casters
CAUTION:
□ Be sure the drawers are locked and lay the cabinet (B) on its top. Use packaging material to protect the finish.
□ Attach the swivel casters (E) to the unit, on the same side as the handle (C), insert bolts (AA) through washers (BB) and swivel
caster (E) into the cabinet (B).
□ Tighten all casters with supplied hex key (DD) or 12 mm wrench/socket.
□ Repeat this process for the fixed casters (D) on the opposite side of the cabinet (B).
□ Return the cabinet (B) to its upright position.
CC
B
Do not over tighten the bolts.
2
Attaching the bottle opener
□
Position the bottle opener (F) over the holes on the
cabinet (B).
□
Attach with the bolts (CC) and tighten with supplied
hex key (DD).
CAUTION:
C
6
Do not over tighten the bolts.
B
C
CC
F