Using The Metronome - Roland VT-12 Owner's Manual

Using the Metronome

You may want to practice by singing at the tempo of the metronome.
The sound is automatically recorded while the metronome is playing, so you'll be able to listen to
yourself afterward (the Review function).
* A new recording will start each time you sound the metronome. The previously made
recording will be overwritten. If you stop the metronome within 3 seconds, the sound will not
be recorded.
* A maximum of 10 minutes can be recorded in metronome mode. When 10 minutes have been
exceeded, recording will stop. The metronome will continue sounding even after recording
stops.
* You cannot set the time signature.
1
Press the [ ] button .
The VT-12 will enter Metronome mode.
The display will indicate the current
tempo value.
2
Use the [ ] [
to adjust the tempo .
Range: 30–250
MEMO
You can also set the tempo by
tapping the [ ] button at the
desired timing (the Tap Tempo
function).
3
Press the [
The metronome will begin playing, and
recording of the sound will begin.
The [ ] button will blink in time with the
tempo.
MEMO
You can also play the metronome while a
guide tone (p. 11) is sounded.
4
Sing in time with the metronome .
As you sing, be aware of the pitches you're singing.
] buttons
] button .
6
Press the [REVIEW]
button .
The recorded sound will start playing.
Playback will stop when you press the
[ ] button.
5
Press the [
The metronome and sound recording
will stop.
Lit: Guide tone and pitch you're
singing
] button .
ENG
DEU
FRA
ITA
ESL
POR
NLD
15