Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Other Products
Marketing Name / Model
[List multiple models if applicable.]
HP R/T3000 G4 HV NA/JP UPS
HP R/T3000 G4 HV INTL UPS
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
4
6
3
0
Page 1
Advertisement
Related Manuals for HP R/T3000 G4 HV NA/JP UPS
Summary of Contents for HP R/T3000 G4 HV NA/JP UPS
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
- Page 3 Loosen the screws fixing the battery door, remove the battery door, and pull out the battery. EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 4 4. Loosen the screws fixing the top cover, and remove the top cover. 5. Disconnect the LCD cable and front FAN cable connecting to control PCBA, loosen the screws fixing the right panel ASSY, and remove the right panel ASSY 6.
- Page 5 7. Disconnect the cables connecting to Slot box, AVR, rear FANs, I/O PCBA, and rear panel ASSY, and disassemble the cable clip sticking on the mainframe, and loosen the screws fixing the main PCBA, then remove the main PCBA . 8.
- Page 6 9. Cut off the cable tie, disconnect the cables connecting to I/O PCBA, loosen the nuts fixing the AVR, and then remove the AVR. 10. Remove the RPO connector, loosen the screws fixing Slot box, COM PCBA, rear FANs, and remove Slot box, COM PCBA, and rear FANs.
- Page 7 11. Loosen the screws fixing I/O PCBA, and then remove the I/O PCBA. 12. Disassemble right panel ASSY into separate parts. EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...