Jeep KJ Liberty 2005 Service Manual page 26

BRAKES (25E)
LEFT FRONT WHEEL SPEED SENSOR SIGNAL —
TEST
6 Turn the ignition off.
Inspect the wheel bearings for excessive runout or clearance.
NOTE: Refer to the appropriate service information, if necessary, for
procedures or specifications.
Is the wheel bearing clearance within specifications?
Yes → Go To 7
No
7 Turn the ignition off.
Visually inspect brakes for locking up due to lining contamination or overheating.
Inspect all components for defects which may cause a WHEEL SPEED SENSOR
SIGNAL DTC to set.
Is any component damaged?
Yes → Repair as necessary.
No
ACTION
→ Repair as necessary.
Perform ABS VERIFICATION TEST - VER 1.
Perform ABS VERIFICATION TEST - VER 1.
→ Refer to symptom WHEEL SPEED SENSOR CIRCUIT for fur-
ther diagnostics.
Perform ABS VERIFICATION TEST - VER 1.
24
Continued
APPLICABILITY
All
All