BMW F 800 GS 2012 Rider's Manual page 117

Replacing brake light and
rear light bulb
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Replacing turn indicator
bulbs, front and rear
without LED turn indicators
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1.
OE
Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
8
115
z
OE