Led Settings; Maintenance; Support - Axis 209MFD User Manual

RTP/MPEG-4
These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use
for the video stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers should be
used for multicast streams. For more information, please see the online help.
Bonjour
The AXIS 209MFD includes support for Bonjour. When enabled, the camera is automatically detected by
operating systems and clients that support this.

LED Settings

The Status indicator LED on the camera can be set to flash at a configurable interval (or to not light up at
all) whenever the unit is accessed. For a listing of all LED behavior, see page 7, or the online help. Note that
the LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

• Restart - The camera is restarted without changing any of the settings.
• Restore - The unit is restarted and most current settings are reset to factory default values. The set-
tings that will not be reset are as follows:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• Default - The default button should be used with caution. Pressing this will return all of the cam-
era's settings to the factory default values (including the IP address)
Upgrade Server - See Upgrading the Firmware, on page 36.
Backup - To take a backup of all of the parameters, and any user-defined scripts, click this button. If
necessary, it will then be possible to return to the previous settings, if settings are changed and there is
unexpected behavior.
Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore
button. The settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configu-
ration of multiple units or for firmware upgrades.

Support

Support Overview
The support overview page provides valuable information on troubleshooting and contact information,
should you require technical assistance.
System Overview
System Overview - page provides a quick look over the current network, security, event and camera
settings.
Logs & Reports
When contacting Axis support, please be sure to provide a valid Server Report with your query. The Access
Log is automatically included in the server report.
Information
This page gives you access to the following log files and reports that may prove useful when
troubleshooting a problem or when contacting the Axis support web.
AXIS 209MFD/MFD-R/MFD-R M12
33