Table of Contents
Advertisement
This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily.
Method
Make the short circuit
between the test point of
SERVICE and the GND.
<NOTE> WHEN "N" IS ALWAYS BEING DISPLAYED ON THE TV MONITOR.
This product is usable the remote controller which is used by VHS of the other brand.
If "N" is always being displayed on the TV monitor, can not control from provided remote controller since this product is other
brand format.
• How to return a JVC format.
Turn off the power of the set and push the CHANNEL+ button and the REC button of the set simultaneously.
VHS Alignment Tape
MHP
Torque Tape
PUJ48076-2
MECHANISM ADJUSTMENT PARTS LOCATION GUIDE
3
2
1
10
9
SERVICE MODE LIST
The BOT, EOT, and the Reel Sensor do not work and the deck can be operated
without a cassette tape.
Refer to the "PREPARATION FOR SERVICING"
(REMOTE CONTROLLER FORMAT)
SERVICING FIXTURES AND TOOLS
VHS Alignment Tape
Torque Gauge
MHP-L
PUJ48075-2
Short Jumper
8
Operations
Roller Driver
PTU94002-2
4
5
1.
Tension Connect
2.
Tension Arm
3.
Guide Roller
4.
Audio/Control Head
5.
X value adjustment driver hole
6.
P4 Post
6
T Brake Spring
7.
8.
T Reel
9.
S Reel
10.
Adjusting section for the Tension Arm position
7
X-JG153 X Value Adjustment
Screwdriver
1-11
Advertisement
Table of Contents
