Recording menu 3
The default settings are marked with
AF-A setup
The position "A" of the focus mode lever is set to AF-A (Automatic AF) (page 52) at the
default setting. You can change the function to DMF (Direct man. focus).
AF-A (
)
DMF (
)
To make a fine adjustment in Direct Manual Focus
1 Set to [DMF].
2 Set the focus mode lever to "A".
3 Press the shutter button halfway down to lock the focus.
4 Turn the focusing ring to fine-tune the focus while pressing the shutter button halfway down.
Shutter button
Focusing ring
5 Press the shutter button fully down.
• Once you release your finger from the shutter button, the focus lock operation starts again from the
beginning when you press the shutter button halfway down.
AF area
You can select the AF area.
Wide (
)
Spot (
)
Local (
)
For details on the operation
.
Assigns the Automatic AF function.
Assigns the Direct man. focus function. You can make a fine
adjustment after adjusting the focus in auto focus.
For details, see page 49.
1
page 32
Focus mode lever
101