7-4-2 Control Frame
7-4-2-1 Button
7-4-2-2 Loop Count
7-4-2-3 Progress Indicator
7-4-2-4 Short Text Message
7-4-2-5 Background Color
LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8
Contains the user interface elements used for:
•
Diagnostic control, and
•
Operator feedback
This button has two modes each with appropriate text:
•
Execute - to start the diagnostic, and
•
Abort - to stop a diagnostic
The button can also be disabled.
This is an editable text field that will only accept numeric values
with 4 digits or less. When the button is configured as an
"execute" button and pressed, the loop count field will be
queried to determine the number of times to execute the
diagnostic.
Displays a graphical progress indication to the user.
Displays either a starting message or aborting message, as well
as the diagnostic completion status.
Initially gray, the Control Frame background color changes upon
completion of a diagnostic to indicate completion status.
•
Fail = Red
•
Pass = Green
•
Neither pass nor fail = Set back to Gray (for example, final
code status is Aborted).
Global Service User Interface (GSUI)
7-15