Appendix A. Xgs-600 Gauge Specifications; Instrument Specifications - Agilent Technologies XGS-600 Instruction Manual

Appendix A. XGS-600 Gauge Specifications

Instrument Specifications

Table A-1 provides the XGS-600 instrument specifications.
Specification
Display
Keypad
Serial Communication
Open-Collector
Set-Point Outputs
XGS-600 Gauge Controller
Table A-1 General XGS-600 Gauge Specifications
Type: Backlit dot matrix monochrome LCD
Backlight: White LED
Small Font mode: Up to 8 channels displayed simultaneously
Large Font mode:Up to 2 channels displayed, readable from 15 feet
5 button membrane with positive tactile feedback
ASCII protocol: RS232 and RS485, no parity
BCD protocol: RS232
RS485 address range: 00 - FF
Baud Rate: 9600 or 19600
Type: 8 open collector type, ground referenced outputs
Voltage Rating: 32 VDC max
Current Rating: 50 mA max
Output Voltage:
V To Gnd
out
V @ 5 mA = 0.6 V
on
V @ 25 mA = 0.75 V
on
V @ 50 mA = 0.90 V
on
Programming capability:
Can assign up to 2 outputs per gauge channel
Separate make and break pressure levels
Independent time delays on make and break of 0.0 to 9.9 seconds
Manual override capability of each set point output
Response Time: 20 msec max (when delay = 0.0)
Description
max
max
51