Manufacturer's Information; Transport; Delivery And Performance; Storage - GEM 3220 Installation, Operating And Maintenance Instructions

7

Manufacturer's information

7.1 Transport

Only transport the device by suitable
G
means. Do not drop. Handle carefully.
Dispose of packing material according
G
to relevant local or national disposal
regulations / environmental protection
laws.

7.2 Delivery and performance

Check that all parts are present and
G
check for any damage immediately upon
receipt.
The scope of delivery is apparent from
G
the dispatch documents and the design
from the order number.
The performance of the device is
G
checked at the factory.

7.3 Storage

Store the device free from dust and
G
moisture in its original packaging.
Avoid UV rays and direct sunlight.
G
Storage temperature: See chapter 5
G
"Technical data".
Solvents, chemicals, acids, fuels or
G
similar fl uids must not be stored in the
same room as the devices and their
spare parts.

7.4 Tools required

The tools required for installation and
G
assembly are not included in the scope
of delivery.
Use appropriate, functional and safe
G
tools.
8

Functional description

The GEMÜ 3220 temperature transducer
converts the physical variable temperature
proportionally into an electrical signal.
The process connection is configured as
standard with male threads to DIN 3852
in sizes G 1/2 and G 3/4. The electrical
connection is via a plug complying with
DIN EN 175301-803 form A. The installation
position is optional. After screwing in the
connecting element, the upper part of the
housing can be rotated up to ± 180° to the
required position by loosening the fastening
screws. Medium wetted components are
made of PVDF or ceramics, the housing is
made of ABS and the seal of FPM.
17 / 24
3220