Table of Contents
Advertisement
4
. Troubleshooting
A) MASTER RESET, to do in case of software malfunctions:
Note
User's waypoints and settings will be deleted.
Switch Geosat
2C
Switch it On pressing [PAGE] together with another key. A new MENU will be
displayed on the screen.
Use [CURSOR] to select RAM Menu and press [ENTER].
With the right [CURSOR] select RAM clear.
When RAM clear is highlighted press [ENTER] and [ENTER] again to confirm.
B) Problems with GPS signal reception:
Check that the antenna is positioned as advised in the manual.
Check that the antenna connector is correctly located in Geosat
Perform a GPS RESTART, pressing [MENU] in the GPS page.
Make another attempt to obtain the GPS signal.
User Manual
Off.
.
2C
35
Advertisement
Table of Contents
