Cleaning The Spray Arms - Asko DBI253IB.W.AU Operating Instructions Manual

Care and cleaning

Cleaning the spray arms

Holes and bearings can sometimes become blocked. Remove any debris using a pin or something
similar. The spray arms also have holes on their undersides.
To facilitate cleaning, you can remove the spray arms. Remember to fit them firmly back into place
after cleaning.
Top spray arm
• The upper basket must be removed before the top spray arm can be released. See section
Upper spray arm.
• Pull out the top cutlery tray. Press the top spray arm up and unscrew the spray arm bearings
counter-clockwise to remove the spray arm.
Upper spray arm
• The upper basket must be removed before the upper spray arm can be released. Pull out the
upper basket and turn the basket catch on each runner outwards (see illustration). The basket
can now be removed.
• Pull the upper spray arm straight up to release it.
Lower spray arm
• Pull the lower spray arm straight up to release it.
26