Protecting The Environment; Technical Data - Black & Decker PD1800EL Original Instructions Manual

ENGLISH
Cleaning the fine particulate filter (fig.F)
The fine particulate filter (17) prevents particles and larger
objects from entering the motor housing.
The filter (17) is re-usable and should be cleaned regularly.
Remove the pre-filter (16) from the appliance as described
u
above.
Remove the fine particulate filter (17) by pulling firmly.
u
Tap the filter vigorously to remove loose dust from the
u
filter.
If necessary, wash the filter in warm, soapy water.
u
Make sure that the filters are dry.
u
Refit the fine particulate filter (17) on to the appliance.
u
Refit the pre-filter (16) as described above.
u
Replacing the filters
The filters should be replaced every 6 to 9 months and when-
ever worn or damaged. Replacement filters are available from
your Black & Decker dealer (cat. no. PD10):
Remove the old filters as described above.
u
Fit the new filters as described above.
u

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection. z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
6
(Original instructions)
Batteries
Z
Black and Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment.:
If you want to dispose of the product yourself, the battery must
be removed as described below and disposed of in accord-
ance with local regulations.
Discharge the battery by operating the appliance until the
u
motor stops.
Invert the appliance to get access to the screws that at-
u
tach the base.
Remove the 4 screws.
u
Remove the base.
u
Disconnect the 3-pin connector.
u
Place the battery in suitable packaging to ensure that the
u
terminals cannot be short-circuited.
Take the battery to your service agent or to a local recy-
u
cling station.
Once removed, the battery can not be refitted.

Technical data

PD1800EL
(H1)
Voltage V
18
dc
Battery
Type Li-Ion
Weight
kg
1.62
Charger
CHA0100014G
CHA0100014B
Input voltage V
120 - 240
ac
Output voltage V
23
dc
Current
mA
400
Approximate
h
4
charge time
Weight kg 0.32