Advertisement
3. Use the #10 screws and plastic anchors to secure each of the
4. Carefully position the TV55 antenna so that the Cam-locks slide
5. Once the Cam-locks are in the channel properly, turn the Cam-
Note: If the Cam-locks do not lock securely, you may need to
adjust the location of the Cam-locks along the channel.
6. Skip to the "Connecting the TV55 Antenna to a TV" section to
8
Wall-Mount Cam-lock units into the wall at the marks made in
Step #2. (As an alternative mounting method, you may choose
to use longer screws directly attached into wood supports, wall
studs, or use a different wall-anchoring device.) Make sure the
Cam-lock wings are vertical.
into the channel on the rear of the antenna.
locks 1/4-turn to secure the antenna. Do not turn these more
than necessary to lock into the antenna and secure it snugly.
See Fig 5.
finish installation.
See Fig 3.
Fig 5.
See Fig 4.
Fig 4.
Advertisement
