Page 1
Model PRO 9845 Owner's Manual 2 Button Remote Keyless Entry System With Two Auxiliary Outputs FEATURES: 2 Two Button, 3 Channel RF Transmitters Three Channel Code Learning Receiver Remote Panic In All Modes Built-In Parking Light Output LED Status Indicator Ignition Door Locking/Unlocking Horn Output OPTIONS...
Page 2
Your PRO 9845 Keyless Entry System has many features and available options some of which must be selected at time of installation. For your reference, the list on the back page of this manual shows what features and options have been installed with this particular system.
UNLOCKING THE SYSTEM As you approach the vehicle, press and release the left button on the keychain transmitter, the doors will unlock, the parking lights will flash two times, the vehicle horn (or optional siren) will chirp twice, and the dash mounted LED will turn off. If you have the optional entry illumination circuit installed, the interior light will turn on for 30 seconds or until the ignition key is switched on.
Note: In the event that you lose your keychain transmitter or the transmitter fails to operate the keyless entry system, the valet switch can be used to override the optional Starter Inter- rupt, and therefore allow the engine to be started. To override system: 1.
Page 5
NOTE: You may access the Channel 2 command regardless of whether the system is "locked" or "unlocked", but not when the ignition switch is in the on position. This is to prevent the output from accidentally opening the vehicle's trunk when the vehicle is in motion. ADDITIONAL REMOTE FUNCTION CHANNEL 3 The system has an additional output, (Channel 3) ,that can be connected to a number of different optional accessories.