Advertisement
Quick Links
Installation Instructions
Model CCDFR
Color Camera External Mount
CCDFR FEATURES:
!
High Resolution, 1/3"CCD Color Camera
!
Compact Zinc Alloy Die Cast Body
!
Waterproof Housing
!
Waterproof Microphone
!
Adjustable Mounting Angle
!
Wide Angle Lens
!
Flush Mount or Surface Mount
128-7223
1 of 12
Advertisement
Related Manuals for Audiovox CCDFR
Summary of Contents for Audiovox CCDFR
- Page 1 Installation Instructions Model CCDFR Color Camera External Mount CCDFR FEATURES: High Resolution, 1/3”CCD Color Camera Compact Zinc Alloy Die Cast Body Waterproof Housing Waterproof Microphone Adjustable Mounting Angle Wide Angle Lens Flush Mount or Surface Mount 128-7223 1 of 12...
- Page 2 Color Camera View: Cable Connector End View: 128-7223 2 of 12...
- Page 3 Specifications: 1. Signal System: NTSC 2. Voltage: DC12V 3. Current: 80mA 4. Image Sensor: 1/3” CCD Color Sensor NTSC: 510 X 492 picture elements 5. Horizontal Definition: 420 Lines 6. Viewing Angle: 120 degrees 7. Minimum Illumination: 0.8 LUX 8. Outer Dimensions: 1.18”(W) x 1.10”(H) x 1.65”(D) 9.
- Page 4 Contents: 128-7223 4 of 12...
- Page 5 Contents Description: 1. Camera: 1 8. Slant Washer 1: 1 2. Support Bracket: 1 9. Slant Washer 2: 1 3. Lock Nut: 1 10. Tapping Screw: 2 4. Protective Cover: 1 11. Combine Screw: 2 5. Top Cover: 1 12. Washer: 2 6.
- Page 6 Flush Mount Note: 1. Camera 3. Lock Nut 5. Top Cover 6. Flat Washer 1 14. Mounting Plate 128-7223 6 of 12...
- Page 7 Flush Mount Installation: 1. Select a suitable mounting location in the rear center of vehicle. Check behind panel for wire routing access and confirm that the drill will not damage any existing components. Use a 7/8” hole saw to drill the mount ing hole.
- Page 8 Angle Flush Mount Note: 1. Camera 3. Lock Nut 5. Top Cover 7. Flat Washer 2 8. Slant Washer 1 9. Slant Washer 2 Size of Mounting Holes (See the Attached Page) 128-7223 8 of 12...
- Page 9 Angle Flush Mount Installation: 1. Select a suitable mounting location in the rear center of vehicle. Check behind panel for wire routing access and confirm that the drill will not damage any existing components. Drill four 1/8” positioning holes and one 7/8”...
- Page 10 Surface Mount Note: 1. Camera 4. Protective Cover 11. Combine Screw 12. Washer 2. Support Bracket 3. Lock Nut 5. Top Cover 6. Flat Washer 1 13. Docking Nut 128-7223 10 of 12...
- Page 11 Surface Mount Installation: 1. Locate suitable mounting location in the rear center of the vehicle and use the support bracket (# 2) as a template to mark and drill two 5/32” holes on the mounting location. 2. Put the support bracket (# 2) onto the camera neck, then screw the lock nut along the camera neck to secure the bracket (# 2) to the camera body (# 1) in the showed direction.
- Page 12 © 2004 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-7223 128-7223 12 of 12...