Brother BAS-311H Service Manual page 132

10. ELECTRIC MECHANISM
Set the program No.
you ordinarily use.
Depress the foot
switch to the
second position,
and release it.
Is the work clamp moving
to the sewing start
position?
Moving to
the sewing
start point.
Does the work
clamp rise?
Depress the foot
switch to the first
position, and
release it.
Does the work
clamp rise after
it has lowered?
123
Note: When the program you ordinarily use is not set, the needle may hit the
Note: For a two-pedal foot switch, depress the start switch.
When the work clamp does not move at all.
NO
YES
When the error code "E130",
"E131" or "E132" appears on the display.
When the error code "E200",
appears on the display.
When the error code "E210",
appears on the display.
When the error code "E300",
appears on the display.
NO
YES
Note: If you depress to the foot switch to the 2nd position, the machine will start.
work clamp.
(No error displayed.)
For a two-pedal foot switch, depress the start switch.
BAS-311H
Turn on the power.
#4
OFF
#5
OFF
#6
OFF
#7
OFF
#8
OFF
#9
OFF
#10
OFF
3321B