Switching Channels - Audiovox FP1500 Operating Instructions Manual

0
1
3
Basic Control
T o set sleep mode

Switching Channels

Use numeric buttons on remote control to select the channel you desire.
When selecting Single or Double digits channels (e.g., Channel 8) be sure to
complete the selection within 4 seconds.
Action 1: Press "0" / Action 2: Press "8"
note: always include the digit "0"in front of Single digit channel selections. ( e.g.,
Channel "8" is selected by pressing "08").
When selecting three digit channels (e.g., 1 18), please complete selection within
4 seconds. This is accomplished by doing the following:
Action 1: Press "100"
Action 2: Press "1"
Action 3: Press "8" to complete the 3 digit channel selection.
Make use of the channel selection buttons to scroll up and down.
Aerial antenna selection:
Press CH Selection up, channel selection moves from
2 3 ... 68 69 2 3 ...
Press CH Selection down, channel selection moves from
3 2 ... 69 68 3 2 ...
Cable selection:
Press CH Selection up, channel selection moves from
1 2 ... 125 1 2 3 ...
Press CH Selection down, channel selection moves from
3 2 1 125 ... 3 2 1 ...