Electrolux EFA 90540 Instruction Manual page 15

Touch
Basic functions
control
When pressed the motor is set to the intensive speed
T5
timed to 5 minutes. At the end of 5 minutes of intensi-
ve speed the hood starts again at the speed it was set
to previously. In case the hood is set to the intensive
speed directly from OFF-state it will then start from
the first speed after 5 minutes of intensive speed.
When pressed for 4 seconds it resets the filter alarm
F
signal indicated by flashing of the touch control T1.
This procedure can be carried out only when the
motor is stopped.
EN
Indicator lights
Touch control lit
Touch control lit Metal grease filters satu-
ration alarm. Metal grease
filters need to be washed.
The alarm starts up after
100 working hours.
Flashing touch Charcoal odour filter satu-
control ration alarm. Charcoal
filter has to be replaced
and metal grease filters
washed. The alarm starts
up after 200 working
hours. (Activation; check
the paragraph "Odour
filter")
1
15
5