Suzuki DF2.5 Service Manual page 97

6·34 POWER
CONROD CAP
1. Apply engine oil to the crank pin, the connecting rod and the
connecting rod cap
2. Install the conrad cap in the direction as shown in the
3. Apply engine oil
to the conrad bolts.
4. the two conrad bolts to the specified in two
steps.
bolt:
1st step 3.5 N·m (0.35
2nd step 7 N·m kg-m, 5.0
1. Apply engine oil to the shaft
2. Install the shaft to the cylinder block.
3. oil to the cam faces, the cam and the
4. While aligning each mark on the camshaft gear and the
crankshaft install the camshaft (2).