Audiovox PCX-3500XL User Manual page 13

BASIC FUNCTIONS
BASIC FUNCTIONS
1
When phone rings or LED blinks press any key
except Volume or [END\<!>].
T.d
..~~
1
MISSED
XX CALLS
18:25
2
Displays the number of missed
calls and the time the call was
missed.
.The message will be cleared
when you press the [CLR] or
[END\<!>] key.
To end the call, press [END\(!)]
This function allows an incoming call to be answered by
opening the flip cover: To enable this function press [MENU],
[2], [4] and select [YES].
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
9 1
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings (Refer to page 36)
Adjust volume by using the volume control keys
during the following operation.
.During a Call : Earpiece volume adjust-
ment.
.
Standby Status
ment.
Ringer volume adjust-
When there is an incoming call, the
caller's phone number is displayed
on the screen.
9
Toll 04j'0'-
.
When the Phone Rings: Ringer volume
adjustment.
Call status in hands-free : Hands-free
volume adjustment. Press (END\(!)]
when the phone rings and it will mute
the ringer.
CALLER ID
XXX-XXX-XXXX
.
This function notifies you there is an incoming call when you
are on the phone.
This function disables the ringer and vibrates the phone any
time an incoming call is in process. To enable this function
press [MENU], [41. [21 and select VIBRATOR or by pressing
the "up" and "down" keys at the left upper side of the phone.
.
To answer the calf, press [SEND] when you hear the beep.
.
To switch back to the first caller, press [SEND] again.
[18]
[19]