PARTS LIST OPERATING INSTRUCTIONS 1. Connect the main frame to the power source, and then connect the parts we provide to the main frame. Make sure that put the fixture in a dry and stable place. 2. Turn on the machine by pressing down the power button on the back side of the main frame.
PANEL INSTRUCTIONS Working Mode Switching Button Time Adjusting Button FIR Switching Button TENS mode Adjusting Button Intensity Increasing/Decreasing Button Start/Stop the Working Cycle Power Switch Operating Steps 1. Once the machine is energized, press the upper A/B MODE button to select the desired working mode.
Page 6
Press TIME button can adjust working process. ADJUST THE ION CONCENTRATION VALUE Ion concentration value is displayed on the lower right corner of the screen. The perfect value range is between 2.5-2.8. If the value is lower than 0.6, the icon which means more salt is needed will flash.
Page 7
HOW TO USE THE FIR BELT FIR belt is needed to be connected to the main body at first and then be tied around user’s waist or thigh. Press the belt button to ignite the belt function. The icon which means low intensity will flash. Press belt button again can select Low, Medium and High intensity.
The array is not connected. Check if the array is plugged in The machine stops working The array is broken. Replace the array. SPECIFICATION Item No.: SUK-805D Power: 130W Frequency: 50Hz-60Hz Electric Current: 0-3.0A Input Power: AC110V Out Power: 0-20V.