Placing Telephone Calls - Audiovox MVX-480 Series User Manual

To Recall from Memory with Name
Recalling from the repertory memory with name is identical to standard repertory recall. When the number is recalled, the
display will show the Alpha Name Tag as well as the stored number.
To Place a Call
1. Enter the phone number.
2. The last 10 digits of the dialed number are displayed on the readout.
3. Press . The
Note: If dialing error is made, press
mately less than 0.5 sec.) clears the last digit only.
If the Call Fails to Go Through
If you hear the "reorder" signal, press
·
(Redialing with digit keys is not necessary.)
If the "intercept" signal is heard, press
·
Automatic Redial (Programmable Option)
If the feature of Automatic Redial (Programmable Option) is selected, your unit will automatically make seven attempts
to reach the cell site when the first try is not successful.
The indicator will stay on, but the speaker will be muted for thirty seconds. This is done so that you do not hear
the reorder signals out of the speaker. If you need to terminate the automatic redial, press
Terminating a Call
Press and the
To Receive Calls
1. When the telephone rings, press
Silent Incoming Calls
If Silent Alert feature is set, a single beep and a flashing "CALL" message on the display will alert you of an incoming
call. Once you have switched to silent alert, the phone stays in that mode until you deactivate it
1. Press , then

PLACING TELEPHONE CALLS

indicator will light.
, then enter the phone number again. Pressing
, then if there were no dialing errors, press
indicator will go out.
to answer the call. The
. The "S-ALT ON" will appear in the display.
then redial the correct number.
indicator will light.
momentarily (Approxi-
for redial.
.