Memory Name Tag; To Enter Names Using Alpha (Letters); To Store Name With Phone Number; To Recall From Memory With Name - Audiovox CTX3200 User Manual

@Loudspeaker: Leave the handset on the cradle:
To increas_Keep pressing
the desired sound level.
To decrease-Keep pressing
the desired sqmd level.
Sound level will be displayed on the readout digitally
during the level adjustment and the sample tone will
indicate the sound level when you are not engaged in
a telephone conversation. The display format is as
follows:
SPK [17 (1 to 10)
l Handset: Lift the handset and perform the same
manner as above.
In this case, the display format is as follows:
l Alert Tone: Press m
Then adjust the alert tone level in the same manner
as above. Your telephone will ring at the new level.
In this case, the display format is as follows
ALT 117] (1 to 10)
M E M O R Y N A M E T A G
This feature permits you to tag an identifying name
(up to 5 characters) to each phone number in the
memory address. The name will be displayed each
time you recall a number from memory address.

To Enter Names using Alpha (Letters)

1.
Press [ml
to indicate Alpha Mode is active.
2. Press digit keys repeatedly until the character you
need appears. The following table shows which
character is assigned to each digit key.
ASSIGNED ALPHA CHARACTERS
KEY
1 (Blank)
2 (ABC) A
D
3 (DEF)
4 (GH I) G
J
M
6 (MNO)
P
7 ( P R S )
T
8 ( T U V )
W
9 (WXY)
0
0
#
#
q
key until you get
q
key until you get
q
key then H
will appear on the readout
1
c 2
F 3
I 4
L 5
0 6
R S 7
v
Y z 9
3. When the character you need is displayed, press
4. Go back to step 2, and repeat the same procedures
until the complete character name is displayed.
5. When an entry error is made, press ICLR/ momen-
tarily to erase the last character. If you press
readout will be erased.

To Store Name with Phone Number

Enter the phone number.
Press ml to set Alpha Mode.
Enter the name you need. (Refer to "To Enter
3.
Names using Alpha".)
Press JSTO/ then enter the memory address (01
4.
through 99), to store the number with the name
into memory.
Note: If you enter the phone number after entering
the name, the name will be erased.
Example: To store the phone number 123-4567 with
the name JOHN into memory address 15.
1. Enter the phone number
2. Set Alpha Mode; v]
3. Enter the Name; m jALPHl Fl p] Fl-1
4. Store the Number; m m Fi

To Recall from Memory with Name

Recalling from the repertory memory with name is
identical to standard repertory recall. When the
number is recalled, the display will show the Alpha
Name Tag as well as the stored phone number.

ALPHASEARCH

This feature permits you to find a phone number
stored in the memory by the first character of the
Alpha Name Tag. This search can retrieve all
entries beginning with the assigned initial character.
1. Press m/ to set Alpha Mode.
2. Enter the initial character, by which you need to
search the phone number. Then press m/
3. Press m then 1#3
The display will show the first entry whose Name
Tag begins with the assigned initial character,
and which is stored in the lowest memory address.