Advertisement
The purpose of this Addendum is to inform the user of the default lock code to be used the first time the Lock/Unlock function
is accessed. For more information on the Lock Option, refer to the Shuttle User Guide SIR-PNP1 Manual, Document Number
128-6812, Page 16. This Addendum is intended for use in conjunction with the instructions found within the User Guide
Manual.
Lock/Unlock Default Code Function
The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock code is
"0 0 0 0". This code can be maintained or changed. To change the default lock code perform the following procedure:
1. Press and hold the MODE button to access the User Menu.
2. Rotate the Rotary Encoder Knob (ADJ) to select the "Lock Options".
3. Press the Select Button (
4. Rotate the Rotary Encoder Knob (ADJ) to highlight "Edit Code".
5. Press the Select Button (
6. Enter the default code "0 0 0 0"
7. The "New Code" prompt will appear. Enter your new four digit code using the 0-9 number buttons. You will then be
prompted to confirm the new code by entering your code again.
8. The lock code is now changed. Refer to the Shuttle User Guide SIR-PNP1 Manual for further details pertaining to this
function.
If you need help, just call our toll-free telephone assistance line at 1-800-645-4994
© 2003 AUDIOVOX ELECTRONICS CORP., HAUPPAUGE, N.Y.
).
).
Page 1 of 1.
128-6843 ADDENDUM
128-6843 ADDENDUM
Advertisement
