Care Instructions; Troubleshooting - IKEA ENEBY 20 gen 2 Manual

CARE INSTRUCTIONS

To clean the speaker, wipe with a moist
cloth. Never submerge the speaker in
water.
NOTE!
Never use abrasive cleaners or chemical
solvents as this can damage the
product.
Product servicing
Do not attempt to repair this product
yourself, as opening or removing covers
may expose you to dangerous voltage
points or other risks.

Troubleshooting

Problem
Cannot use Bluetooth:
Poor sound quality when
playing via Bluetooth:
Poor sound quality when
playing via AUDIO IN
input:
Manufacturer: IKEA of Sweden AB
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by IKEA is under license. Other
trademarks and trade names are those
of their respective owners.
Tip
Make sure 3.5mm connector is not plugged into AUDIO IN
jack on rear panel.
Make sure your phone, tablet or other media device supports
Bluetooth.
Make sure to connect to the IKEA device called ENEBY 20/30
Make sure your phone, tablet or other media device is paired
and that its Bluetooth is turned on.
Make sure no other Bluetooth devices in the room are paired.
If so, turn off the Bluetooth function in that device.
If Bluetooth reception is poor, move the device closer to the
speaker or remove any obstacles between the device and the
speaker.
Note: Bluetooth reception will normally operate at a distance
of up to 6-8m in conditions with an unobstructed path. When
objects, furniture or walls are in between, Bluetooth reception
will be reduced. When the device is placed in pockets of
clothes or in a bag, Bluetooth reception can be reduced.
Make sure your phone, table or other media device is not at
maximum volume, if so, turn down the volume.
8