Advertisement
Alignment and Adjustments
4-7-2 Convergence Adjustment
<Cautions regarding Automatic Color Adjustment>
Caution
1. This model employs the Automatic Color Adjustment function to prevent distortion
2. The Screen Jig should be used for precise adjustment, so it does not escape the
3. Adjustment should be precise, otherwise an Automatic Color Adjustment
1. Aging the TV over 30 minutes is required.
2. Apply the NTSC input signal from the antenna or other external input source.
Before adjusting the Green, Red and Blue patterns, adjust the DY of the CRT to avoid
Caution
having a tilted center line.
3. Press Mute, 1, 8, and 3 (on the remote control) sequentially to enter Convergence Mode. The Test Pattern
is displayed.
If an OSD (On-Screen Display) appears during the process, press the
Caution
Convergence mode and then re-enter Convergence mode.
4-22
of the Convergence by the earth's magnetic field. For it to function properly, the
Convergence should be precisely adjusted.
sensor's detection area. Sensors are on the center of each of the 4 faces.
error occurs.
MUTE
S.MODE
key to exit
Samsung Electronics
Advertisement
