Table of Contents
Advertisement
Quick Links
Guitar & Amp Signal Manager
O
Radial Engineering Ltd.
1165-1845 Kingsway Ave, Port Coquitlam BC V3C 1S9
Tel: 604-942-1001 • www.radialeng.com
Email: info@radialeng.com
Specifications and appearance are subject to change without notice.
Copyright © 2021 Radial Engineering Ltd.
JX44 V2
'
M
wner
s
anual
True to the Music
www.radialeng.com
Advertisement
Table of Contents
Related Manuals for Radial Engineering JX44 V2
Summary of Contents for Radial Engineering JX44 V2
- Page 1 Guitar & Amp Signal Manager ’ wner anual Radial Engineering Ltd. 1165-1845 Kingsway Ave, Port Coquitlam BC V3C 1S9 Tel: 604-942-1001 • www.radialeng.com www.radialeng.com Email: info@radialeng.com Specifications and appearance are subject to change without notice. Copyright © 2021 Radial Engineering Ltd.
-
Page 2: Table Of Contents
We encourage you to read through this manual to familiarize yourself with the many features available on the JX44 V2, allowing you to get the most out of this powerful stage control device. If you have any questions not answered in this user guide, please visit our website at www.radialeng.com for additional resources and frequently asked questions. -
Page 3: Overview
JX44 remotely. Instrument and of the Stereo EFX loop can be assigned individually amplifier switching & muting, and EFX Loop on/off are to each amplifier output. all controllable via MIDI commands. Radial Engineering Ltd. JX44 V2™ Owner’s Manual... -
Page 4: Features
LIFT: Disconnects chassis ground on the corresponding amplifier output to eliminate hum and buzz caused by ground loops. OUTPUT ON/OFF: Large switches with amber LED indicators turn each amplifier output on/off. Multiple outputs can be on simultaneously. MUTE: Switch with red LED indicator cuts signal to all amplifier outputs. Radial Engineering Ltd. JX44 V2™ Owner’s Manual... - Page 5 IEC POWER: Connection for standard IEC power cable (included). 100/240V operation for international use. MIDI IN: Standard 5-pin MIDI connector allows MIDI controllers to activate the inputs and outputs of the JX44 V2. Eight dip switches configure channel, program, and control changes. Can be used in conjunction with JR-5 remote footswitches.
-
Page 6: The Instrument Inputs
Instrument Input-4 is unique in that it may be exclusively assigned to the JX44’s direct output. See the direct output section of this manual for more information on using this feature. JX44 V2™ Owner’s Manual Radial Engineering Ltd. -
Page 7: The Amplifier Outputs
EFX ON jack, or via the MIDI input. Each of these cases will cause the front panel mute LED to illuminate, indicating that outputs have been turned off. Please see the JR-5 remote, EFX Loop remote, and MIDI sections of this manual for further details. Radial Engineering Ltd. JX44 V2™ Owner’s Manual... -
Page 8: The Stereo Efx Loop
If you are using the SGI Loop (detailed on Example: Using the JX44 for wet/dry/wet stage setups page 10), keep in mind that your remote pedalboard effects will still be present on all amp outputs, even those set to DRY. JX44 V2™ Owner’s Manual Radial Engineering Ltd. -
Page 9: The Efx Loop Remote Input
If the footswitch is wired to connect the tip to the sleeve when pressed, it will instead control the EFX Loop on/off feature of the JX44 as described above. Radial Engineering Ltd. JX44 V2™ Owner’s Manual... -
Page 10: The Tuner Output
ON switch is engaged for that input. Wireless Wireless Wireless When using the JX44 with both electric and acoustic instruments, connect the acoustic to Input-4 and assign it to the Direct output. JX44 V2™ Owner’s Manual Radial Engineering Ltd. -
Page 11: The Sgi Loop
Any amplifier assigned to L or R will therefore include both the SGI Loop and the Stereo EFX Loop in the signal path, while amps assigned to DRY will only include signal from the SGI Loop. Radial Engineering Ltd. JX44 V2™ Owner’s Manual... - Page 12 SGI-44 interface. The artist can enjoy the freedom of the wireless guitar and have their pedals out front at their feet along with the JR-5 remote to control amplifier or instrument switching. Up to 300 feet Using the SGI Loop on the JX44 with a wireless guitar system. JX44 V2™ Owner’s Manual Radial Engineering Ltd.
-
Page 13: The Jr-5 Remote
When the JR-5 is operating in BANK mode, the JX44 front panel switches will still function as typical on/off switches for each input or output. This scenario allows you to recall four banks with the JR-5 footswitch, while using the JX44 front panel controls to temporarily add or subtract instruments/amplifiers. Radial Engineering Ltd. JX44 V2™ Owner’s Manual... -
Page 14: Midi Capabilities
The JX44 ships with Dip switches 1-4: DOWN, and 5-8: UP. This configuration means the JX44 will respond to MIDI messages on all MIDI Channels (OMNI mode), and the JX44 will respond to Control Change messages only. The default MIDI dip switch settings JX44 V2™ Owner’s Manual Radial Engineering Ltd. - Page 15 JX44 is in ‘normal’ mode. When switch 8 is moved to the DOWN position, ‘wet/dry/wet’ mode is activated. Please see page 8 of this manual for further details on this feature. Radial Engineering Ltd. JX44 V2™ Owner’s Manual...
- Page 16 Program C14 Program C15 Program C16 ALL AMPS OFF Program C17 (Mute) ALL MUTE ON Program C18 (Unmute) ALL MUTE OFF Program C19 (EFX on) EFX ON Program C20 (EFX off) EFX OFF JX44 V2™ Owner’s Manual Radial Engineering Ltd.
-
Page 17: Specifications
GENERAL Conditions:....................For use in dry locations only between 5°C and 40°C Power: ....................100V to 240V, 50/60Hz with IEC connection Conformity: ...................CE, FCC Warranty: ....................Radial 3-year, transferable *Specifications are subject to change without notice. Radial Engineering Ltd. JX44 V2™ Owner’s Manual... - Page 18 True to the Music JX44 V2™ Owner’s Manual Radial Engineering Ltd.
- Page 19 True to the Music Radial Engineering Ltd. JX44 V2™ Owner’s Manual...
- Page 20 RADIAL ENGINEERING LTD. 3 YEAR TRANSFERABLE WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and work- manship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding finish and wear and tear on components under normal use) for a period of three (3) years from the original date of purchase.