Panasonic HDC-SD80P Service Manual page 32

Service Manual
Diagrams and Replacement
Parts List
High Definition Video Camera
Model No.
HDC-SD80P HDC-SD80EP
HDC-SD80PC HDC-SD80GA
HDC-SD80EB HDC-SD80GC
HDC-SD80EC HDC-SD80GN
HDC-SD80EE HDC-SD80GK
HDC-SD80EF HDC-SD80GT
HDC-SD80EG
Vol. 1
Colour
[HDC-SD80]
(K)...........Black Type
(S)...........Silver Type (except EC/EF/GT)
(R)...........Red Type
(T)...........Brown Type (only EB/EC/EF/EG)
(H)...........Glay Type (only EB)
(C)...........Beige Type (only GA/GC)
Table of contents
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. SD P.C.B. .............................................................................. S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. SD Schematic Diagram ......................................................... S-5
S5. Print Circuit Board .................................................................... S-6
S5.1. SD P.C.B. .............................................................................. S-6
S6. Replacement Parts List ............................................................ S-7
S7. Exploded View ....................................................................... S-11
S7.1. Frame and Casing Section.................................................. S-11
S7.2. Packing Parts and Accessories Section .............................. S-12
VM1102013CE
HDC-TM80P HDC-TM80EF
HDC-TM80PC HDC-TM80EG
HDC-TM80PU HDC-TM80EP
HDC-TM80EB HDC-TM80GA
HDC-TM80EC HDC-TM80GC
HDC-TM80EE HDC-TM80GK
[HDC-TM80]
(K)...........Black Type
(S)...........Silver Type (only P/PC/GK)
(R)...........Red Type (only P/PC/PU/GK)
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
COMPONENTS IDENTIFIED WITH THE MARK
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as "
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
Circuit name being connected.
OFTR FEP
Name of Signal
S-1
HAVE THE SPECIAL CHARACTERISTICS
" mark.
This signal is connected
to the FEP schematic diagram.