Network Status - LG ProCentric 32LV570H Setup Manual

IP Environment Setup (Cont.)
(Continued from previous page)
The next Network Setting window will enable you to specify
the IP and DNS confi guration for this TV. Auto settings will
be selected by default. Use the arrow keys to select the
appropriate options, and specify the confi guration data for
the IP and DNS modes. When all fi elds are completed, select
OK on the screen and press OK on the Installer Remote.
Note: You can specify a static DNS server with an auto-
confi gured IP address but not vice versa.
The TV will attempt to connect to the network and you will
see a progress screen that indicates status as each network
element is confi rmed. When the network is connected
successfully, a "Wired network is connected" message will be
displayed at the right of the screen, along with the network
confi guration data (see example at right below).
5. Select Complete (if not already selected), and then press OK
on the Installer Remote to return to the IP Environment Menu.
Note: If the network connection is not successful, the progress
screen will identify the network element in which the connection
failed. Check your cabling and/or, if necessary, press
Installer Remote to verify the confi guration data.

Network Status

This option enables you to check the status of the network
connection.
1. With the IP Environment Menu on display, use the arrow
keys on the Installer Remote to select Network Status.
Then, press OK.
The TV will display a status screen as it confi rms each of
the network elements—TV, Gateway, DNS, and Internet
(see example at right). If the network is connected
successfully, a "Wired network is connected" message
will be displayed at the right of the screen, along with the
network confi guration data.
Note: If a problem is detected, the status screen will
identify the network element in which the connection failed.
Check cabling and/or confi guration data, as necessary.
If the status screen is still on display, you can select Test
and press OK to recheck the network status.
2. When the status screen shows that the network is
connected, select Complete (if not already selected)
and press OK on the Installer Remote to return to the IP
Environment Menu.
Note: If you wish to cancel the status check while it is in progress,
select "Close" or press
48
to return to the IP Environment Menu.
on the
Network Status
Setting
Network Setting
Select the IP setting mode.
IP Mode
IP Auto Setting
• IP Address
0 .
• Subnet Mask
255 .
• Gateway
0 .
DNS Mode
DNS Auto Setting
• DNS Server
0 .
OK
Previous
Auto mode
TV
Wired network is connected.
Gateway
MAC Address : 3C:CD:93:E5:78:8F
IP Address : 10.2.3.4
DNS
Subnet Mask : 255.255.255.0
Gateway : 10.10.10.10
Internet
DNS Server : 10.5.6.7
Test
0 . 0 . 0
255 . 0 . 0
0 . 0 . 0
0 . 0 . 0
Next
Complete
206-4317 Draft A.2