Jump Starting - BMW G 650 Xmoto Rider's Manual

Pull bulb 2 out of socket 3.
Replace the defective bulb.
Bulb of number-plate
light
W5W / 12 V / 5 W
Insert bulb 2 into socket 3.
Seat bulb holder 1 in the
light carrier.

Jump starting

The wires leading to the
power socket do not
have a load-capacity rating
adequate for jump-starting
the engine. Excessively high
current can lead to a cable
fire or damage to the vehicle
electronics.
Do not use the on-
board socket to jump-
start the engine of the
motorcycle.
Touching live parts of
the ignition system with
the engine running can cause
electric shock.
Do not touch parts of the igni-
tion system when the engine
is running.
A short-circuit can result
if the crocodile clips of
the jump leads are accident-
ally brought into contact with
the motorcycle.
7
87
z