Command Syntax - Siemens SIMATIC S5 Series Manual

Editing PCP/M Files in MS-DOS
5.3

Command Syntax

PCOPY Copies files from or to PCP/M media.
You always copy from source to target.
PCOPY nDR:[name][.ext] DR:[path][file] [-Q]
or
PCOPY DR:[path][file] nDR:[name][.ext] [-Q]
n:
DR:
name:
ext:
path:
file:
Q:
5
Example:
PCOPY 0A:TEST@@ST.S5D C:\S5_DATA\DEFAULT
Note:
If you press CTRL+C, the copying procedure will stop and the destination file will be
deleted.
PDEL Deletes files on PCP/M media
PDEL [n]DR:[name][.ext] [-Q]
n:
DR:
name:
ext:
Q:
PDIR Displays the PCP/M media directory
PDIR [n]DR:[name][.ext]
n:
DR:
name:
ext:
5-4
user area, 0 to 15
drive, for example, A:, B: for diskettes and C: for the hard disk.
file name, in accordance with PCP/M conventions.
file extension, in accordance with PCP/M conventions.
path info., in accordance with MS-DOS conventions.
file name, in accordance with MS-DOS conventions.
optional parameter, scanning mode if a file already exists.
This example copies the TEST@@ST.S5D file from the
PCP/M diskette in drive A to the hard disk drive C,
into the MS-DOS directory C:\S5_DATA\DEFAULT.
user level, 0 to 15 or * for all user levels
drive, for example, A:, B: for diskettes and C: for the hard disk.
file name, in accordance with PCP/M conventions.
file extension, in accordance with PCP/M conventions.
optional parameter, scanning to see if a deletion is needed
user level 0 to 15 or * for all user levels
drive, for example, A:, B: for diskettes and C: for the hard disk
file name, in accordance with PCP/M conventions.
file extension, in accordance with PCP/M conventions.
Working with S5-DOS/ST
C79000-G8576-C760-03