DISASSEMBLY PROCEDURE
24. How to remove the back panel
(1) Remove the front panel. (Refer to Procedure 1.)
(2) Remove the side panels. (Refer to Procedure 22.)
(3) Remove the 4 screws on the back panel, and remove the
2 screws that hold the back panel onto the frame. Then
pull out the back panel while lifting the top panel. (Photos
24-1 and 24-2)
Note:
The handles are removed by pushing them up.
Photo 24-2
Screw (opposite side)
Back panel
Note: The photo shows the left side.
The opposite side also has the screw to be
removed on the same position.
OCH714A
Top panel
Screw
83
PHOTOS/ FIGURES
Photo 24-1
Screws (Top panel)
Handles
Screws
(Back panel)
Top panel