Advertisement
Start Engine
➊
Parking brake set and locked
➋
Range shift lever [N]
➌➍
Foot off of both drive pedals
➎
PTO switch [OFF]
➏
Turn the Key switch [START]
PTO Operation
➑
Select the desired position of the
PTO select lever [MID/BOTH/REAR]
➎
PTO switch [ON]
Mid PTO Reverse
Override
➒
Push and hold the reverse
override switch
➍
Press the reverse pedal
* PTO select lever should be in the MID or MID/REAR position.
** When releasing the reverse pedal, PTO Reverse override is
canceled. Push the PTO reverse override switch again to
reactivate before pressing the reverse pedal.
Engine Speed Control
➐
Adjust the throttle control lever
Travel Speed Control
➋
Stop the tractor to select the range
shift lever [1/2/3]
➊
Parking brake released
➌➍
Press or release the drive pedals to
increase or decrease the travel speed
Cruise Control
Operation
Regulates forward speed of the tractor
at a preset speed.
It will not apply to the reverse.
➌
Depress the forward drive pedal
➓
Lift up the cruise control set lever to
activate
➊➌
Press the forward drive pedal again
or the brake pedal to deactivate
Differential Lock
Depress the differential lock pedal
YANMAR COMPACT UTILITY TRACTOR | QUICK OPERATION GUIDE
LAMPS & INDICATORS ON METER PANEL
READ YT235
OPERATION MANUAL
Drain Plug
PAGE
8-1
9-5
➊
Coolant Temperature Lamp
➋
Tachometer
Indicates the current engine speed in increments of 100 Revolutions Per Minutes (rpm).
• Engine Rated Speed: 2800 rpm
• Rear PTO Rated RPM 540 rpm at Engine 2600 rpm
LCD (Fuel gauge/Hour meter/Error code)
➌
Fuel gauge: Indicate fuel level. When the remaining fuel becomes
extremely low, the icon will start blinking.
Hour meter: Always check the current engine operating hour for
next service intervals.
Error codes
➍
DISP Switch
Push DISP switch (1)
Lamps and Indicator Lights
➌
➊
Stays Green: The engine is in
normal operating range.
Green Flashing: The engine
is close to overheating.
1. Error display
Push DISP switch (2)
Push DISP switch (3)
Warning lamp
Issue(s) is happening.
See "Error code".
Parking brake lamp
Indicate parking brake is
engaged.
Glow plug light
Indicate engine glow plugs are
working for cold start.
Oil pressure light
Engine oil issue is happening.
Charging light
Battery charging issue is
happening.
➋
Turns Red: The current coolant
temperature is too high. Stop
and check for debris blockage
on radiator.
Error code:
2. Normal display
1.
When an error occurs, the LCD
(3) indicates "Error" (Alternately
switches with the normal
display). Either of the panel
icons will blink.
2.
Press the "DISP switch" (4)
three times. The error code will
be displayed by being divided
into three parts (For example:
28 00062.05). Contact local
YANMAR dealer for technical
assistance.
Caution lamp
Electrical issue(s) is happening.
See "Error code".
DPF lamp
Request to perform DPF
regeneration.
See back page.
PTO lamp
PTO switch is in the "ON"
position.
Neutral lamp
Range shift lever is in the
Neutral position.
Remark: When turning the Key switch ON,
all the lamps turn on once and these lamps
include lamps that are not used on the
Model YT235.
READ YT235
OPERATION MANUAL
PAGE
5-24
5-25
PAGE
7-6
READ YT235
OPERATION MANUAL
PAGE
14-41
14-54
Advertisement
