Bradford White UCG100H199 Installation & Operation Manual page 33

To Decrease Temperature Setpoint
Step 1. Press and hold "Temperature Down" button until desired setpoint temperature appears on the display.
Step 2. Press "DONE" button for new setting to take effect immediately. If the "DONE" button is not pressed,
the new temperature setting will take effect in approximately 10 seconds.
To View Combustion Rate
Step 1. Select Next while viewing DHW Setpoint in User Mode to access Rate screen. Rate will only be
displayed while the burner is operating.
Step 2. Select Next to go back to the DHW Setpoint screen.
33